Galaxy Note 3 SM-N9005 အတြက္ Android 4.4.2 KitKat Firmware (New zealand) ကုိတင္ေပး
လိုက္ပါတယ္။အင္စေတာလုပ္နည္းအဆင့္ဆင့္ေသခ်ာဖတ္ျပီးလုပ္ေဆာင္သြားပါ။Firmware Version Info
(PDA: N9005XXUEND3 CSC: N9005TNZENC2 MODEM: N9005XXUENC2 CHANGELIST: 1168347 BUILD DATE: 14.04.2014)
လိုက္ပါတယ္။အင္စေတာလုပ္နည္းအဆင့္ဆင့္ေသခ်ာဖတ္ျပီးလုပ္ေဆာင္သြားပါ။Firmware Version Info
(PDA: N9005XXUEND3 CSC: N9005TNZENC2 MODEM: N9005XXUENC2 CHANGELIST: 1168347 BUILD DATE: 14.04.2014)
1- Check battery percentage, your device should have at least 60% battery power
2- Turn on USB Debugging mode, go to Settings-General-Developer
Options (As the Developer options are hidden by default on all Android
device running on Android 4.2 or up, So go to Settings-General-About on
your Galaxy Note 3 and tap Build Number for 7 times to visible the
Developer options.) See the image above
3- Backup important data and settings to external storage.
4- Install USB driver for your device on your computer- Download Samsung USB Driver
- Download Android 4.4.2 XXUEND3 Firmware for Galaxy Note 3 N9005 from the above list
- Download Odin 3.09
- Switch off your phone and boot Galaxy Note 3 N9005 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
- Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
- Now connect your Galaxy Note 3 N9005 to your computer via USB cable
- In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
- Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
- Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
- In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with .tar.md5 extension (The firmware file look something like: N9005XXDLJ5_N9005ODDDLI7_INU.tar.md5)
- Now, click on the Start button to begin the installation process, wait few moments.
- Once completed, you would see “PASS!” message in ID:COM port having green background
- Your phone should automatically reboot after completion
- You can now disconnect your phone from computer
- Finish
★★နည္းပညာၿမိဳ႕ေတာ္★★
No comments:
Post a Comment